Used to connect Zurn 1/2" Pex Tubing to Zurns QickZone Manifold or Zurns Preassembled Manifold (#QHPM). To connect the tubing to the manifold you first make sure that the tubing is cut to length with a straight cut free of burrs. Slide the nut over the tubing with the threads facing the manifold, then slide the split ring over the tubing. Insert the barbed fitting into the tubing. Insert the ...

• Package contains a pair of connectors.
• Connector consists of a nut, split ring and barbed fitting.

Manufacturer: Zurn

This fully programmable thermostat offers you four settings per day as well as the ability to select the exact floor temperature. This unit also has built-in ground fault protection.

• Digital, 7 day, 4 Function Programmable, Floor Sensing Thermostat with built-in GFCI - 110 Volt

Manufacturer: Nuheat

Zurn has changed the look of this Manifold. The new style has the thermometer in the ball valve and the vent assembly at the end. They both have the same features. You will receive one of the styles pictured above. The Zurn Preassembled Radiant Heating Manifold is the smart choice for controling the fluid distribution in a hydronic Radiant Heating System. It's designed for easy filling, purging, ...

• The Supply Header includes 3 ports with integral flow meters that range from .132 to 1.32 GPM.
• The Return Header includes 3 ports each having it's own shut off valve.
• Manifold requires 3 pairs of QHMMC tubing to manifold connectors. (NONE INCLUDED, SOLD SEPARATELY)
• 1" FIP Shut off valve, thermometer, auto air vent and fill/drain valve are mounted on each Header.
• Manifolds come with mounting brackets attached for quick and easy mounting.

Manufacturer: Zurn

The Zurn Preassembled Radiant Heating Manifold is the smart choice for controling the fluid distribution in a hydronic Radiant Heating System. It's designed for easy filling, purging, isolation and zoning. It provides constant access to supply and return fluid temperatures and individual loop flow rates. The Supply and Return ports can accept 3/8", 1/2", 5/8" or 3/4" Zurn pex tubing by attaching ...

• Manifold has a maximum flow rate of 8 GPM.
• The Supply Header includes 6 ports with integral flow meters that range from .132 to 1.32 GPM.
• The Return Header includes 6 ports each having it's own shut off valve.
• Replace the Return port valve handles with Zone actuators(QHMBMVDS) to divide the loops into zones.
• 1" FIP Shut off valve, thermometer, auto air vent and fill/drain valve are mounted on each Header.
• Manifolds come with mounting brackets attached for quick and easy mounting.

Manufacturer: Zurn

Installing Zurn Zone Valve Actuators on all of the circuits of the return header allows the user to group one or any combination of loops together into zones. To install the actuator you must first remove one of the white plastic caps on the return header. To remove the white plastic cap turn it counterclockwise until completely open, then use a flat ended screw driver to pry the cap up and off. ...

• For use with Zurn QickZone and Preassembled (#QHPM) Manifolds.
• Unit operates on 24 VAC, 3W
• End switch is rated at 1.5A
• Has a pop-up indicator which rises as the unit opens.
• Unit operates up to a maximum ambient air temperature of 122 degrees F.

Manufacturer: Zurn

Zurn has changed the look of this Manifold. The new style has the thermometer in the ball valve and the vent assembly at the end. They both have the same features. You will receive one of the styles pictured above. The Zurn Preassembled Radiant Heating Manifold is the smart choice for controling the fluid distribution in a hydronic Radiant Heating System. It's designed for easy filling, purging, ...

• The Supply Header includes 10 ports with integral flow meters that range from .132 to 1.32 GPM.
• The Return Header includes 10 ports each having it's own shut off valve.
• Manifold requires 10 pairs of QHMMC tubing to manifold connectors. (NONE INCLUDED, SOLD SEPARATELY)
• 1" FIP Shut off valve, thermometer, auto air vent and fill/drain valve are mounted on each Header.
• Manifolds come with mounting brackets attached for quick and easy mounting.

Manufacturer: Zurn

Used to connect Zurn 3/4" Pex Tubing to Zurns QickZone Manifold or Zurns Preassembled Manifold (#QHPM). To connect the tubing to the manifold you first make sure that the tubing is cut to length with a straight cut free of burrs. Slide the nut over the tubing with the threads facing the manifold, then slide the split ring over the tubing. Insert the barbed fitting into the tubing. Insert the ...

• Package contains a pair of connectors.
• Connector consists of a nut, split ring and barbed fitting.

Manufacturer: Zurn

Instantly eliminate those cold spots in your home with this versatile, high-tech, portable electric radiant heating blanket instead of dangerous space heaters.

Perfect on top of existing hard surface flooring that feels cold or over already installed carpets in your bedroom or living room to add that extraordinary on-demand heating comfort right at your feet.

This 3' x 5' RugBuddyTM is perfect ...

• Energy Efficient: 165 watts - less energy than 5 lightbulbs.
• Safe: UL listed - no risk of fire, overheating, or shock.
• Invisible: Hidden under area rug.
• Save energy by lowering your central heater settings.
• Save energy by only heating the rooms you are using.

Manufacturer: Speedheat®

This relay simplifies the wiring between the thermostat (such as QHSTHO), zone pump and boiler.

• 120 VAC input, 7.2 amp maximum load.
• Controller has a cover and has external indicator lights.
• Compatible with many models of thermostats.
• Has a transformer that will power a hard wired thermostat.

Manufacturer: Zurn

The Zurn Preassembled Radiant Heating Manifold is the smart choice for controling the fluid distribution in a hydronic Radiant Heating System. It's designed for easy filling, purging, isolation and zoning. It provides constant access to supply and return fluid temperatures and individual loop flow rates. The Supply and Return ports can accept 3/8", 1/2", 5/8" or 3/4" Zurn pex tubing by attaching ...

• Manifold has a maximum flow rate of 8 GPM.
• The Supply Header includes 5 ports with integral flow meters that range from .132 to 1.32 GPM.
• The Return Header includes 5 ports each having it's own shut off valve.
• Replace the Return port valve handles with Zone actuators(QHMBMVDS) to divide the loops into zones.
• 1" FIP Shut off valve, thermometer, auto air vent and fill/drain valve are mounted on each Header.
• Manifolds come with mounting brackets attached for quick and easy mounting.

Manufacturer: Zurn