Imagine being able to walk into a room, press a button and have the airflow only to that room immediately boosted by up to 80%, quietly. Increase ventilation to selected areas when guests are over, equalize temperatures in rooms that are too hot or too cold. Or, build your own power circulated HVAC system. Installation is easy: simply cut the flexible or rigid duct where you want the fan ...

• Boost the airflow to poorly ventilated rooms!
• Installs in metal or flexible ducts
• Boost airflow to selected areas
• Use as a super quiet bathroom exhaust fan
• Use to assist ventilation

Manufacturer: Suncourt

Use to offset pipe diagonally or horizontally. Factory silicone sealed to contain fly ash. Elvow swivels 360° at base. Angle not adjustable.

• 3", 45 degree
• For venting pellet appliances
• Double wall/insulated design
• 012" 430 stainless steel inner wall
• 018" galvalume steel outer wall

Manufacturer: Simpson Dura-Vent

#7410 reusable roof anchor is constructed using rugged alloy steel with a yellow chromate finish. It is easily installed and removed from trusses or sheathing and uses either 12 #14 x 3½" screws of 20 16d nails. Fits any roof peak up to 12/12 and can also be mounted perfectly flat.

• Rated at over 5,000 lbs.
• Economical because it can be used again and again.
• Holes are clearly marked for use with either nails or screws.
• Screw holes are counter-sunk so screws are flush with the anchor.
• Meets the requirements of OSHA 1926 and ANSI Z359.

Manufacturer: Falltech

Sturdy anchor is easily installed and removed from trusses or sheathing, allowing repeated uses from job to job. Fits any roof peak up to 12/12 and can also be mounted perfectly flat. U.S.A.

• Made of rugged alloy steel with yellow chromate finish
• Easily installed and removed from trusses or sheathing
• Uses either 12 #14 x 3 1/2in. screws or 20 16d nails
• Screw holes are countersunk so screws are flush with the anchor
• Fits any roof peak up to 12/12

Manufacturer: FallTech

- Easy to follow instructions - Size: 8 Inches - Color: Silver - Manufacturer's limited warranty - Optional Accessories (Not Included) - Installation instructions enclosed

• Installs in metal or flexible ducts
• Boost airflow to selected areas
• Use as a super quiet bathroom exhaust fan
• Use to assist ventilation
• 500 cubic ft. maximum air flow per minute

Manufacturer: Suncourt

Pellet stove elbow for low temperature venting systems. 1" minium clearance to combustibles. Not for use in cornburning appliances.

• "DURAVENT" 90 DEGREE ELBOW
• 5-year shelf life
• High temperature black finish
• Recommended for inside use but can be used for total vent project
• Double wall/insulated design

Manufacturer: Simpson Dura-Vent

Use above flashing or top support plate. Use mastic to vent pipe.

• 2 Wall
• 6" Size
• Adjustable support plate
• "AMERI-VENT" 6" STORM COLLAR - 2WALL

Manufacturer: AMERICAN METAL PRODUCTS

Provides a cover for rough wall openings and serves as a firestop.

• "AMERICAN METAL" 3" VENT COLLAR - 2WALL
• Work as firestop.
• Wall openings cover
• 2 WALL
• 3" Size

Manufacturer: AMERICAN METAL PRODUCTS

All the same great features as our 120VAC model, but comes with battery clips to attach to your vehicle battery. Airflow Data - Ducted blowers are tested with the duct size (8") and length specified. One and then two 90° turns are placed into the duct to introduce real world conditions. Free Air is the airflow without any duct attached. 15ft=4.6m, 25 ft=7.6m. Free Air - 862CFM. 15ft 1-90° - ...

• 15 foot ducting

Manufacturer: Euramco

Simply put ... the UB20 is our most popular blower. The double-walled housing is molded from a UV-resistant polyethylene; making it dent-resistant, corrosion-proof and virtually indestructible. Add a polypropylene blade, tough nylon motor mount and thru-bolted motor and this unit can handle plenty of abuse. Shipyards, utilities, contractors, rescue teams have put it to the test and have come to ...

• 25 foot ducting

Manufacturer: Euramco